Battery Load Tester Instruction Manual Simplified Check Program for Charging Systems Alternator Test 12 Starter Circuit Test 14 between carbon pile discs. This will cause the tester to steam a little during first or Alternator, Regulator, Battery& Starter Tester i Table of Contents Read Me First Alternator, Regulator, Battery& Starter Tester iii Read Me First Before starting work with your battery tester, Refer to sections in this manual for more detailed instructions.
500 Amp Carbon Pile Battery Tester Users Manual Failure to follow instructions may cause damage or explosion, always shield eyes. Read entire instruction manual before use. Use the 500 amp carbon pile load tester to test 12 volt batteries, alternators, regulators and starters by putting a load on the system to simulate working conditions. Test complete charging system including alternator, regulator, and battery. Also tests starter motor for excessive draw.
For use with 12 volt systems; User Manual Heavy Duty Alternator Charging System Troubleshooting. Troubleshooting Complete Measure Voltage at Battery Test Alternator Output Troubleshoot per Service Manual Inspect Battery Battery Voltage Test Battery Load Test Squealing noises under the hood? Headlight bulbs blow out Replace Alternator Connect Carbon Pile, Ammeter and Amp Clamp 500 Amp Carbon Battery Tester Owners Manual.
1 MOISTURE If tester has not been used recently, moisture may have condensed between carbon pile discs. This will cause the tester to emit some steam during first or second load application.
This is normal and is when testing the alternator. 3 Carbon Pile Tester: This tester can load test 12 volt batteries, alternators, regulators and starters up to 160 Amp hours or 1000 cold cranking amps. This unit has 500 amp capacity, solid copper cables, heavy duty clamps and it has separate volt and amp meters.
Roadi 3 in 1 Auto Battery Tester, Battery Load Tester& Alternator Analyzer Compatible for 12V Domestic& Imported AutomotiveTruck Accurate Test Result, Professional User Manual MODEL 6034 BATTERY TESTER OPERATORS MANUAL IMPORTANT SAFETY INSTRUCTIONS It is difficult to specify a duty cycle on a carbon pile load tester.
It will vary greatly with ambient temperature, length of test and load ALTERNATOR TEST: Be sure that the battery in the car tests good.
Start engine with tester connected to the battery. An Alternator with a Carbon Pile Regulator. As shown in the diagram, the alternator has a direct current exciter whose armature is mounted on the extension of an alternator shaft.
500 Amp Carbon Pile Battery Load Tester. alternator performance. Variable load capability to 500 Amps Tests batteries to 1000 CCA Enables starter and alternator assessment Large, easytoread gauges Heavyduty clamps penetrate corrosion on battery terminals 1 Year Limited Warranty.
Carbon Pile Variable Battery Load Users Manual Failure to follow instructions may cause damage or explosion, starterdraw and alternator output testing capabilities. condensed between carbon pile discs. This will cause the tester to steam a little during first or second load application. This is normal and