All inquiries concerning this Hoist Inspection and Hoist Maintenance Personnel Manual should be directed in writing to the Chairman of the HMI Engineering Committee, co Hoist Manufacturers Insti tute, 8720 Red Oak Boulevard, Suite 201, Charlotte, North Carolina. 1.
1926. 552 Material hoists, personnel hoists, and elevators. 31k: 1926. 552(a)General requirements. 1926. 552(a)(1)The employer shall comply with the manufacturer's specifications and limitations applicable to the operation of all hoists and elevators.
Inspection hooks are available in top and bottom versions. Refer to Figure 25. Disassembly and reassembly involves removal and reinstallation of the yoke fasteners of the Inspection Hook Set Assembly followed by testing of the hoist prior to returning it to service. The Inspection Hook is available for CF005 through CF015 hoists. HOISTING APPARATUS Inspection Guidelines. Table of Contents leveroperated hoists hand chain hoists manual pullers It should be noted that, since the June 2001 amendments, the exemption for hoisting apparatuses with a Hoisting Apparatus Inspection Requirements Manually Lever Operated Hoist Operator and Inspection and Maintenance Personnel training programs should be based on requirements in accordance with the latest edition of: ASME B30.
21 Safety Standard for Manually Lever Operated Hoists Manual Chain inspecting, maintaining and operating this hoist. 2 Country Club Road inspection requirements and records that may be required by This hand chain hoist provides an efficient means for lifting of freely suspended material loads within its load rating. The frame and covers of the hoist are of stamped steel & PARTS MANUAL HAND CHAIN HOIST PN Rev.
AA June 2015 demonstrated ability to handle all parts and repair requirements promptly and efficiently. inspections. Inspect hoists for operations warning notices and legibility. A crane which has been idle for a period of over 6 months shall be given a complete inspection conforming with requirements of paragraphs (j)(2) and (3) of this section and paragraph (m)(2) of this section before placing in service. P scientists and engineers technology update, pathway analysis for drug discovery computational infrastructure and applications ageneral requirements a1the safe working load of the overhead hoist as determined by the Owners Manual AIR POWERED CHAIN HOIST TCR SERIES MODEL TCR 10 Ton and 25 Ton Capacity Code, Lot and Serial Number 3.
9 Mounting the Hoist 3. 10 Optional Chain Container A regular schedule of inspection of the hoist in accord ance with the requirements of ANSIASME B30. 16 should be recommendations that are available to all hoist users, such as the Hoist Operators Manual, Hoist Inspection and Maintenance Personnel Manual, Manually Lever Operated Hoist Inspection and Hoist Maintenance Personnel Manual, and the Manually Lever Operated Hoist Operators Manual.
All Hoists Need Inspections. Whether it is a manual or power hoist, or if it part of a crane or just suspended by a beam clamp, all hoists need periodic inspections to comply with OSHA standards.
LEVER OPERATED CHAIN HOIST LB SERIES MODEL L5 34 Ton through 9 Ton Capacity Code, Lot and Serial Number A regular schedule of inspection of the hoist in accord ance with the requirements of ANSIASME B30. 21 should be The extender chain is the same size and grade Harrington chain as is used on the hoist.
Overhead Hoist Inspection Requirements A designated person should inspect hoists before their initial use and on regular intervals to verify compliance with ASMEANSI B30. 16. The specific inspection requirements are found in Table 1 and Table 2 of the B30. 16 standard, which are reprinted below with written permission from ASME.
The Occupational Safety and Health Administration (OSHA), in cooperation with the Crane, Hoist and Monorail Alliance, has developed standards for inspection of manual chain hoists.
To comply with these standards, employers must implement a preshift inspection and documentation program and train employees on these programs.